The Best Cycle Country Plow

When winter weather piles up, a blade mounted on an ATV or UTV can clear a long driveway faster than a shovel and more comfortably than wrestling a heavy snow blower.

Cycle Country has long been one of the most recognized names in this category, and the best cycle country plow setup for your property depends on your machine, the size of your drive, and the kind of snow you deal with.

This guide breaks down the components that matter, compares the strongest options on the market, and helps you decide where to spend your money before the first storm hits.

Snow Removal Wiki evaluates gear through published specifications, expert review consensus, and verified buyer feedback rather than relying on any single opinion.

We looked at complete blade systems, mount kits, push tubes, wear bars, skid shoes, and trip springs to find the best cycle country plow parts and compatible upgrades.

If you are also weighing a traditional snow blower, our roundup of snow blowers for lake effect snow explains how a blower handles deep, persistent snow.

Below are the top picks, followed by a detailed buying guide and answers to the questions we hear most often.

Best Cycle Country Plow Buying Guide

Choosing the best cycle country plow is less about picking a single magic product and more about matching the right blade, mount, and wear parts to your machine and your driveway. These are the criteria we weigh when we evaluate this category.

Blade Width and Material

Blade width is the first decision because it determines how much snow you move per pass and how stable the machine feels.

A 50 inch blade suits smaller ATVs and tighter gates, while a 60 inch blade covers more ground on wide driveways and open properties.

Match the blade to the recommended width limit for your machine, not just the biggest option you can bolt on. A blade that overhangs the front end too much can push the nose sideways and make steering unpredictable.

Steel is the standard for Cycle Country style blades because it holds an edge and stands up to frozen gravel and repeated impact.

Poly blades are lighter and slide more easily on uneven surfaces, but they tend to flex under heavy, wet snow.

Look for a blade with a curved moldboard and a reinforced trip edge; that curve rolls the snow forward instead of letting it pile up and stall the machine.

If you frequently clear a long gravel lane, pair the plow with a salt spreader for driveways to keep the surface passable after the blade has done its main job.

Mounting System and Compatibility

Cycle Country mount kits are designed to fit specific ATV and UTV models, and compatibility is the make or break detail.

Some machines need a dedicated lift bracket and winch mount, while others accept a universal adapter that bolts to the frame. Check the manufacturer’s fitment notes, frame clearance, and the distance between mounting points.

The 10 inch spacing used on many Cycle Country blades is common, but not universal, so measure before you order.

Universal kits can save money, but a model specific kit usually places the blade lower and closer to the machine, which improves down pressure and reduces strain on the front suspension.

If you plan to keep the same blade across two machines, a conversion push tube system is worth considering.

It lets you swap the lift and push components while keeping the blade itself, which is one reason this category shows up in so many best cycle country plow conversations.

Push Tube, Lift, and Angle Controls

The push tube connects the blade to the ATV frame and carries most of the load during a pass.

A straight tube with a sturdy bracket is fine for light snow, while a curved push tube improves clearance over the front tire and lets the blade follow the ground more naturally.

Look for a system with a lift handle or winch attachment that keeps the blade off the ground when you are repositioning. A worn lift mechanism makes the blade sag and bounce, which wears out skid shoes faster.

Angle control is where you will feel the biggest difference in comfort.

Some blades pivot manually with a pin, which is simple and reliable, and others use a lever or spring assist that lets you change the throw direction from the seat.

On a circular driveway, being able to angle the blade without dismounting saves real time, though a snow blower for circular driveways can be a strong alternative depending on the layout.

For narrow paths and porches, an electric snow thrower is handy, but a plow remains the fastest way to move deep snow across open ground.

Wear Bars and Skid Shoes

Wear bars sit along the bottom of the blade and take the brunt of contact with asphalt, concrete, and gravel. Skid shoes lift the blade slightly so the cutting edge does not dig into the surface.

Both parts are designed to wear out, and buying a spare set before a storm beats trying to find one mid January.

Several of the top picks in this guide are replacement wear bars and skid shoes because they are the components that actually keep a plow working season after season.

Check the mounting pattern carefully. Cycle Country blades often use a 54 inch wear bar and a specific skid shoe base, but the hole spacing can vary by blade generation.

A universal shoe with cotter pins is easy to install, while a model specific shoe fits tighter and stays in place longer.

If you clear a property where pets roam, pair your plow maintenance with ice melt safe for cats and ice melt safe for dogs paws so the whole winter routine stays safe for animals.

Trip Springs and Maintenance

Trip springs let the blade hinge backward when it hits a solid object, which protects the mount, the ATV frame, and the blade itself.

A weak or broken spring causes the blade to stay in tripped position or slam back down, and that is one of the first signs your plow needs service.

Replacement trip springs are inexpensive and easy to swap, so it makes sense to keep a set in the shop.

At the start of the season, inspect the pivot points, grease the bushings, and verify that every bolt is torqued to spec.

The same care applies to the surface you are clearing: a plow moves the heavy snow, but a de icer for sidewalks handles the thin layer that freezes overnight.

Together they keep the full path walkable instead of just clearing a strip in the middle.

Why You Should Trust Us

Snow Removal Wiki is an independent publication. We do not sell equipment, take commissions from manufacturers, or accept sponsored placements in our rankings.

To score each product, we define a consistent set of criteria for the category, then rate every contender against those criteria using four sources: manufacturer specifications, expert review consensus, verified buyer feedback, and published data with citations.

That gives us the SRW Score, a 0 to 10 rating that shows at a glance how a product compares with its direct competitors.

We do not conduct our own product trials; our evaluations are grounded in research, published data, expert review consensus, and verified buyer feedback.

We update the rankings as new parts come out, prices shift, and owners log more real world hours.

A product that rates well in one season can fall out of favor if replacement parts become hard to find or a mount kit shows a fitment issue on popular machines.

Our job is to track that signal and keep this guide accurate enough to plan a purchase around.

Final Thoughts

Not every driveway calls for the same setup, and the best cycle country plow depends on how much snow you move and what you already own. The picks below represent the strongest balance of compatibility, durability, and owner satisfaction in this group.

• Best Overall: KFI Products Black CC Conversion Push Tube System earned the top SRW Score in our research because it modernizes an existing Cycle Country blade without forcing you to buy a whole new plow. It keeps the proven blade design, upgrades the push mechanism, and cuts down the cost of switching machines.
• Best OEM-Style Replacement: Cycle Country Blade Push Tube is the direct factory style part when you want original geometry and a simple swap.
• Best Wear Bar Upgrade: KFI Cycle Country 54 Inch Plow Wear Bar gives the blade a fresh, aggressive edge and takes the punishment of gravel and concrete.
• Best Budget Pick: KFI Replacement Skid Shoe for Cycle Country Plow Blades keeps the blade at the right height without draining your winter budget. It is a cheap fix that prevents expensive damage to the blade and the mount.
• Best Heavy-Duty Plow System: Extreme Max 60 Inch Heavy-Duty UniPlow System bundles a full moldboard, mount, and push tube into one box for someone who wants a complete setup from scratch.

Frequently Asked Questions

What is a Cycle Country plow?

Cycle Country is a brand best known for bolt-on snow plow systems for ATVs and UTVs. The original Cycle Country plow line includes blades, mount kits, push tubes, and the lift hardware that connects them.

Many of the parts in this guide are compatible with Cycle Country blades even if they are made by another brand.

Will a Cycle Country plow fit my ATV or UTV?

Fit depends on the mount kit, not just the blade. Cycle Country and compatible brands list the ATV and UTV models that work with each bracket, and you should verify the frame clearance and mounting spacing before ordering.

A universal push tube can solve some fitment gaps, but a model specific kit is almost always the safer route.

If you are in a heavy snow region, a snow blower for Michigan winters is a useful comparison point before you commit to a plow-only setup.

What size blade should I get?

Match the blade width to the machine’s recommended capacity and the width of your driveway. A 50 inch blade is a good match for smaller ATVs, while 54 and 60 inch blades cover more ground on wider driveways and open areas.

If you are still debating between a plow and a blower, our guide to choosing the right snow blower size can help you think through width, depth, and storage.

Are Cycle Country push tubes worth upgrading?

Yes, especially if your current blade already has a straight moldboard but the push tube is bent, rusted, or mismatched. A new push tube improves the angle of the blade and reduces stress on the front of the ATV.

The KFI conversion system and the OEM Cycle Country push tube are the two most frequently recommended upgrades in this category.

How often should I replace wear bars and skid shoes?

Check them at the beginning of the season and then every few hundred feet of gravel or rough pavement.

If the wear bar is rounded or the skid shoes are worn down to the mounting holes, replace them before the next storm.

Keeping a spare set on hand is cheap insurance, and removing a damaged blade from a frozen driveway is not fun.

Can I use a Cycle Country plow with a snow blower?

You can absolutely use both on the same property. A plow clears the main driving surface quickly, while a snow blower handles paths, steps, and the dense windrow the plow leaves behind.

Many homeowners pair a plow with an ice melt jug for the final pass so the surface does not refreeze overnight.

About the author