The Best Stens Snow Blower Accessories

A snow blower is only as good as its wear parts. Scraper bars, skid shoes, paddles, and chute motors take a beating every winter, and replacing them with the best stens snow blower accessory keeps your machine throwing snow effectively.

Stens has built a strong reputation for dependable aftermarket parts that match OEM specifications at a more reasonable price. If you run a snow blower with rubber paddles, you will also want to track the condition of the paddle set.

This guide focuses on the best stens snow blower accessory for common two stage and single stage machines, including MTD, Cub Cadet, Ariens, Toro, and Murray.

Snow Removal Wiki identifies top performers through research, published specifications, expert review consensus, and verified buyer feedback. The list below highlights the options that consistently earned strong praise from owners and experts.

For quick touch-ups, a snow plow shovel can handle spots the blower misses, but for full driveway coverage, the right accessory matters. Read on to compare the top picks.

Best Stens Snow Blower Accessory Buying Guide

Fit and Compatibility

The most important factor when choosing a best stens snow blower accessory is fit. Stens uses OEM part numbers in its listings, so you can match a replacement to your exact model.

For example, scraper bars reference MTD, Cub Cadet, and Toro numbers, while skid shoes are designed for specific series from Murray and MTD. Always check your machine’s model number and compare it with the manufacturer’s reference list before ordering.

If you own a two stage snow blower for heavy wet snow, you will often need a wider scraper bar to handle dense precipitation effectively.

Durability and Material

Wear parts face constant abrasion from concrete, asphalt, and gravel. Metal scraper bars from Stens are built with hardened steel to glide along the surface, while skid shoes use thick plastic or metal runners to protect the housing.

If your driveway is uneven or you frequently clear heavy wet snow, look for thicker bars and reinforced shoes.

Owners who prioritize longevity often pair these accessories with a snow blower for heavy wet snow, since both the machine and the wear parts need to handle extra strain.

Ease of Installation

Most Stens accessories are designed as direct replacements. Scraper bars and skid shoes bolt on using existing hardware, and paddle sets attach to the auger shaft without special tools.

A basic socket set and a few minutes of work are usually enough. This simplicity makes it practical for owners of used snow blowers to refresh older machines without a trip to the shop.

If you are new to winter maintenance, a straightforward installation reduces the risk of misalignment and premature wear.

Value and Warranty

Aftermarket parts can save a significant amount compared to dealership OEM parts, but price is only one part of the equation.

Stens products are widely reviewed by owners who log real winter hours, so you can gauge how well a part holds up before purchase.

For budget-conscious shoppers, a reliable skid shoe or scraper bar at a modest price often delivers the best return. That is especially true when you are working with a budget snow blower that still has plenty of life left.

Maintenance Considerations

Scraper bars and skid shoes wear down gradually, and replacing them at the right time protects your auger and housing.

Check the gap between the scraper and the ground before every season, and replace the bar when it no longer makes even contact. Chute motors should be cycled occasionally to prevent ice buildup.

If you run a large machine with extended runtimes, a snow blower with a large fuel tank will keep you working longer, but the wear parts still need consistent attention.

Why You Should Trust Us

Snow Removal Wiki is an independent review site focused on winter equipment.

We do not sell products or accept free units from manufacturers, and we do not conduct our own product trials; our evaluations are grounded in research, published data, expert review consensus, and verified buyer feedback.

Every product in this roundup was assessed against consistent criteria, including fit, durability, ease of installation, value, and maintenance needs. We analyzed specifications, cross-checked OEM part numbers, and synthesized feedback from owners who use these parts in real winter conditions.

Each accessory is rated on a 0 to 10 SRW Score, where higher scores indicate a stronger combination of compatibility, reliability, and owner satisfaction. For a broader look at winter equipment, our top rated snow blowers guide covers complete machines as well.

Final Thoughts

Best Overall: Stens Scraper Bar 780-132 earned the highest SRW Score in this category thanks to its reliable fit for Toro snow blowers and durable steel construction. It delivers the consistent scraping performance that keeps driveways clear season after season.

Best for MTD Owners: Stens Skid Shoe 780-416 pairs with MTD 980I series machines and provides a stable base that protects the housing and prolongs scraper bar life. Its above average SRW Score reflects strong verified buyer feedback.

Best Budget Pick: Stens Skid Shoe 780-257 is an affordable replacement for Murray two stage snow blowers, offering dependable wear protection without stretching your winter budget.

Best for Single Stage Snowblowers: Stens 780-035 Metal Paddle Set helps older MTD single stage machines throw snow farther and is one of the more durable paddle upgrades available.

Best Chute Control Upgrade: Stens Snowblower Chute Motor 780-050 brings reliable electric rotation to Ariens models, reducing the effort needed to direct snow exactly where you want it.

No matter which accessory you choose, regular maintenance is the key to a long service life. For larger properties, a cab-equipped snow blower can make the job easier, and these Stens parts will keep it running efficiently.

Frequently Asked Questions

How do I know if a Stens accessory fits my snow blower?

Check the OEM part numbers listed in the product description and match them with the part numbers on your current equipment. Stens references original numbers from MTD, Cub Cadet, Ariens, Toro, Murray, and others.

If you are unsure, consult your owner’s manual or contact the manufacturer. For a machine that handles deep drifts, a 24 inch snow blower will have different scraper dimensions than a compact unit, so verify the width carefully.

How often should I replace scraper bars and skid shoes?

It depends on surface type and usage. Concrete is especially abrasive, so many owners replace scraper bars every one to two seasons.

Check the wear indicator if your model has one, and replace when the bar no longer contacts the ground evenly. Skid shoes can last longer, but inspect them after each heavy storm.

An all wheel drive snow blower with good traction can put extra stress on these parts, so monitor them regularly.

Are Stens parts as good as OEM parts?

Stens designs its parts to match OEM specifications and uses quality materials such as hardened steel and reinforced plastic. Many verified buyers report comparable longevity at a lower price.

Expert consensus notes that aftermarket parts from reputable brands like Stens are a solid choice for routine replacements.

If you prefer a trigger steering snow blower for tight turns, the steering system itself is separate from these wear parts, so Stens remains compatible.

Can I use Stens accessories on older snow blowers?

Yes, Stens often covers older models as long as you match the part numbers. For example, the paddle set for MTD single stage snowblowers is designed for 2004 and newer units.

If you own a used snow blower, replacing worn parts with Stens can extend its life at a reasonable cost. A narrow snow blower for tight spaces may have a smaller scraper bar, so confirm the width before purchase.

What is the difference between a scraper bar and a skid shoe?

A scraper bar is the metal blade that slides along the ground at the bottom of the snow blower housing, scraping snow down to the surface.

Skid shoes are the adjustable runners on either side that set the scraper height and protect the housing from damage. Both wear over time and need periodic replacement.

If you frequently clear wet snow, a snow plow for wet snow can be an alternative for large driveways, but for most snow blowers, keeping both parts fresh is essential.

About the author