The Best Snow Blower Dolly

If you clear snow often, you know a snow blower dolly is more than an accessory. It keeps a heavy machine upright between storms, protects the garage floor, and makes spring storage simpler.

A good dolly also reduces strain when you need to position the blower or roll it out of the way.

In this guide, we evaluate the best snow blower dolly options with a research-based process. We compare specifications, expert review consensus, verified buyer feedback, and published data to find a dolly that fits common two-stage machines.

Whether you are comparing gas engines or looking at our snow blower reviews for Tractor Supply shoppers, a dolly is part of the storage equation. Below are our top picks and the buying tips that matter most.

Best Snow Blower Dolly Buying Guide

Compatibility and Fit

Not every dolly works with every blower. The Push Industries 118.638 is designed for 44″, 47″, and 54″ snow blowers and is marketed as a replacement for the John Deere LP70692 deck dolly. Before buying, measure your blower’s width and check the mounting points.

A dolly that matches the frame keeps the machine stable and prevents rocking while you push it.

Two-stage machines with self-propelled drive systems place unusual loads on a storage dolly, so a model built for a specific deck size is usually safer than a universal platform.

If you own a self-propelled snow blower, confirm the dolly’s brackets clear the axle and auger housing. The same caution applies to smaller battery units, where the narrower chassis can make a large dolly feel oversized.

Weight Capacity and Build

Weight rating is the first number to look at. A dolly that strains under a loaded two-stage unit can crack or sag over time.

The Push Industries 118.638 uses a steel frame intended for heavy decked machines, which matches the needs of commercial-grade snow blowers and high-end residential models.

For lighter equipment, check whether the dolly adds unnecessary bulk. Lithium-ion snow blowers are easier to lift, but a dolly still needs rigid wheels and a solid center plate.

Look for welded joints, powder-coated steel, and a weight rating above your machine’s shipping weight if you plan to roll it on uneven garage floors.

Wheel Design and Mobility

Wheels determine how easily you can move a parked blower. Small casters work on smooth concrete, but larger pneumatic or semi-pneumatic wheels handle cracks and expansion joints better.

The 118.638 uses swivel wheels to make tight turns easier in a crowded garage, which is a useful feature when you are sliding a machine between a car and a workbench.

If you store equipment outdoors or on a rough surface, think about wheel diameter and tread. A dolly with narrow hard wheels can sink into soft ground, while wider wheels add stability.

Our snow blower tracks and wheel comparison explains how undercarriage choices affect maneuverability, and those lessons carry over to storage dollies.

Floor and Finish Protection

A dolly protects more than your machine. The rubber-tipped feet or padded brackets on a good dolly keep the blower away from moisture and from direct contact with concrete.

If you clear a concrete driveway, you already know how abrasive winter salt is; a dolly lifts the blower out of pooled water and road grime between uses.

It also keeps the garage floor cleaner by reducing rust drips and fluid markings. Look for a dolly with a wide footprint so the blower does not tip when you release the handle.

A stable base matters more in a tight storage space than in a wide-open area.

Installation and Everyday Use

The best snow blower dolly should feel like part of the blower after one season. The Push Industries design uses a bracket that bolts into existing holes, so installation usually involves hand tools and a little patience.

Some owners prefer a dolly that stays attached to the machine, while others want one that can be removed in minutes for summer maintenance.

Think about how often you move the dolly. If you park the blower in a shed and only roll it out before a storm, a simple setup is fine.

If you move it every weekend, look for smooth wheel bearings and a low profile. For more snow blower shopping tips, our snow blower shopping advice covers retail options and makes it easier to compare dolly features in person.

Why You Should Trust Us

At Snow Removal Wiki, we know winter equipment only earns a recommendation when it has been researched from multiple angles.

We score each product on our 0 to 10 SRW Score using a consistent rubric that weighs specifications, expert review consensus, verified buyer feedback, and published data.

The SRW Score helps us compare apples to apples across products that look similar on the surface.

We do not conduct our own product trials; our evaluations are grounded in research, published data, expert review consensus, and verified buyer feedback.

We combine that analysis with owner experiences, including long-term reports from buyers, to flag real-world issues like fit problems, wheel failure, or rust.

We also review snow blower categories across the site, from snow blowers with heated handles to compact electric models, so our recommendations stay consistent with the full winter equipment landscape.

Affiliate partnerships do not influence our ratings; if you buy through a link, we may earn a commission at no extra cost to you.

Final Thoughts

Best Overall: Push Industries 118.638 Snow Blower Storage Dollies earned the highest SRW Score in this lineup. Its wide 44″, 47″, and 54″ fit range, steel frame, and swivel wheels make it the most versatile pick for two-stage homeowners who want reliable storage.

Best for John Deere Owners: The same dolly is built as a direct replacement for John Deere LP70692, so owners of compatible John Deere decks can order the Push Industries 118.638 with confidence. It keeps the blower upright, stable, and ready for the next storm.

If you are also choosing a new machine, our snow blowers with 6 speeds guide covers models that pair naturally with a wide dolly.

Frequently Asked Questions

Will a snow blower dolly fit my two-stage snow blower?

Most two-stage units need a dolly matched to the width of the deck. The Push Industries 118.638 fits 44″, 47″, and 54″ blowers, so you should measure your unit before ordering. If you are unsure about deck size, check your owner’s manual or search for the model number online.

How much weight can a snow blower dolly hold?

The 118.638 is designed for heavy residential and commercial-style blowers, but you should always confirm the rated capacity with the manufacturer. If you own a larger machine, look for a dolly with a steel center plate and wide wheelbase.

The highest rated snow blowers in our roundups tend to be the heaviest, so pair them with a dolly that does not strain.

Do I need a dolly if my snow blower sits on a concrete floor?

Yes, especially if your garage is exposed to salt or meltwater. A dolly lifts the blower off the slab, so the housing and scraper do not sit in moisture after a storm.

The same care extends to snow blowers used on icy driveways, where ice-melting chemicals can accelerate rust on the underside.

Are snow blower dollies difficult to install?

Most dolly brackets take less than an hour with basic hand tools. The Push Industries design bolts into existing mounting holes, and the instructions are straightforward.

If you own an Greenworks snow blower or another compact model, check the bracket spacing before you commit, because not every dolly is designed for lighter frames.

Can a snow blower dolly be left attached all year?

Yes, that is the main benefit of a dolly. Leaving it attached keeps the blower stable and makes spring or fall maintenance easier. Before extended storage, clean the wheels and wipe down the metal to keep the dolly rolling smoothly.

For owners with battery-powered equipment, our battery powered snow blower guide has tips on preparing a machine for the off-season.

Is a snow blower dolly the same as a wheel kit?

No. A wheel kit replaces the blower’s wheels, while a dolly cradles the deck and lets you roll the whole machine in storage.

A dolly is better for protecting the floor and for positioning the blower when it is not running. Even a Yardmax snow blower with a solid wheel kit benefits from a dolly that spreads the load during storage.

About the author